Next generation RF Power Amplifier
The Tricom Research TCR-NXG-50 is a true simultaneous dual-channel multiband networking RF Power Amplifier designed to extend the range and performance of modern tactical communication radios.
Our innovative software-defined architecture ensures compatibility with all legacy, frequency agile, and networking waveforms operating in the 30-2600 MHz band.
The form factor is ideal for use in mounted configurations whether vehicular, maritime, or airborne.
Requires no radio control or communication; fully independent operation minimizes the need for complex radio interfaces and costly dedicated vehicle adapters.
Related Products
INVISIO Intercom unit
The INVISIO Intercom is designed to bridge the gap between the dismounted and mounted professional by seamlessly integrating the INVISIO personal system and vehicle comms. Capable of connecting to 4 combat net radios, and 5 users for internal voice communication, the intercom has cable autosensing. It is a small and lightweight system that can be powered from a vehicle or common combat radio battery. The INVISIO Intercom weighs 563 grams and measures 150 x 95 x 27 mm.
GLI Cobra Repeater Kit
Repeats a live L1/L2 GPS signal inside any ground vehicle or aircraft- No doubt that GPS is 100% operational! Engineered for field installation. No retrofit OEF / OIF combat proven core technology Enables Jump Master’s GPS Reduces time from dismount to breech on target Easily installed by soldier or maintenance personnel Waterproof & EMI sealed – Built for extreme mission environments Powered by 5590 batteries, or 12/28V vehicle power – Flexible power options LEDs on hardware – Easy to recognize that system is operational Ruggedized carrying case – Ideal for operational environment and field installation Selectable power level, allowing the user to control the area of signal coverage for Airborne and ground platforms Built to military specifications: MIL-STD-810G, MIL-STD-461F (CE 102, CE106, RF 102), MIL-DTL-5541, MIL-STD-704F OR MIL-STD-1275B
GLI Copperhead Repeater Kit
Repeats a live L1/L2 GPS signal inside any ground vehicle – No doubt that GPS is 100% operational! Available as a roll on/roll off or permanent install NVG compatible OEF / OIF combat proven core technology Reduces time from dismount to breech on target Easily installed by soldier or maintenance personnel Waterproof & EMI sealed – Built for extreme mission environments Powered by 5590 batteries, or 12/28V vehicle power Flexible power options LEDs on hardware – Easy to recognize that system is operational Ruggedized carrying case – Ideal for operational environment and field installation Selectable power level, allowing the user to control the area of signal coverage for ground platforms Built to military specifications: MIL-STD-810G, MIL-STD-461F (CE 102, CE106, RF 102), MIL-DTL-5541, MIL-STD-704F OR MIL-STD-1275B
GLI Cottonmouth Repeater Kit
Built to military specifications: MIL-STD-810G, MIL-STD-461F (CE 102, CE106, RF 102), MIL-DTL-5541, MIL-STD-704F OR MIL-STD-1275B Repeats a live L1/L2 GPS signal inside any HMMWV variant- No doubt that GPS is 100% operational! Available as a roll on/roll off or permanent install NVG compatible OEF / OIF combat proven core technology Reduces time from dismount to breech on target Easily installed by soldier or maintenance personnel Waterproof & EMI sealed – Built for extreme mission environments Powered by 5590 batteries, or 12/28V vehicle power – Flexible power options LEDs on hardware – Easy to recognize that system is operational Ruggedized carrying case – Ideal for operational environment and field installation Selectable power level, allowing the user to control the area of signal coverage for ground platforms Built to military specifications: MIL-STD-810G, MIL-STD-461F (CE 102, CE106, RF 102), MIL-DTL-5541, MIL-STD-704F OR MIL-STD-1275B
GLI Viper Repeater Kit
This equipment has received Safety of Flight Approval from the United States Air Force Air Mobility Command Systems Group. GLI-VIPER provides GPS (including GPS supporting the Army’s modernization requirements) coverage within any aircraft. This means any handheld military or commercial GPS receivers, precision air drop guidance units and military free fall receivers acquire satellite signals inside the aircraft. The warfighter will have satellite connectivity and situational awareness prior to exiting an aircraft. A GPS receiver will experience no loss in signal coverage as it moves in or out of any aircraft equipped with GPS Live Inside. Based on technology developed for Boeing C17 Supports options not available in any other repeater Outperforms retransmission systems costing several thousand dollars more. GPS Retransmission technology developed by GPS Source, Inc. is currently utilized by Land Warrior units aboard Stryker, RG-33 and M1151 vehicles.
GPS 1×2 Military Tiny Qualified Splitter (MS12T)
A tiny qualified splitter that still delivers full-size performance, the MS12T is perfect for unmanned aerial vehicles (UAVs) or any other applications with size and weight constraints. It is standard configured with EMI Shielding, Waterproofing and is Hermetically Sealed for long-term durability in even the most rugged applications. The MS12T will allow the signal from one GPS antenna to be split between two GPS/GNSS devices. It can be configured to Pass DC from a connected receiver to also power an external GPS Antenna or both outputs can be DC blocked. Key Features The MS12T Tiny GPS Splitter is a one-input, two output GPS device in which the input from an active GPS antenna is split evenly between two receiving GPS units. Ideal for platforms requiring very small, lightweight, and/or low-power equipment (i.e. Unmanned Aerial Vehicle, UAV). The MS12T can be configured to pass DC from an RF output to the antenna input port in order to power an active GPS antenna. The second RF output is DC blocked and features a 200Ω resistive load to ground to simulate an antenna current draw for any receiver connected to that port. Both outputs can be specially configured to be DC Blocked upon request. Passes all GPS and GNSS frequencies Ideal for UAV Applications Small, Lightweight, and Low-power (SWaP) Tiny Package: 1.875in x 1.750in x 0.438 in. (47.0mm x 44.5mm x 11.0mm) RoHS, REACH, WEEE Compliant, CE Certified MIL-STD 810-F Environmental Qualifications
METRO “Smart” Amplifier
The METRO is a primary signal controller for GPS retransmission. It is an L1 or L1/L2 smart amplifier, designed for all applications that provides a calibrated 1dBm incremental output power control. When used in conjunction with an active GPS receive antenna, it will retransmit GPS signals inside a building, hangar or any structure where GPS is not available. It can be used in an automated test environment or in a shielded room that needs L1 or L1/L2 signal. A user can easily use a push-button control to precisely determine the output power of the METRO signal. This reduces the need for multiple antennas, and multiple antenna cable runs, while lowering maintenance and installation costs. Key Features 1dBm incremental control over output signal level Frequency selectivity – L1 or L1/L2 GPS frequencies Continuous Built-In-Testing (BIT) Diagnostic Capabilities (Displays Faults) Automatic Oscillation Detection Use for any L1 or L1/L2 GPS retransmission application Options AC or DC Power Multiple RF Connector Types L1 or L1/L2
METROe “Smart” Amplifier
The METROe is a primary signal controller for GPS retransmission. It is an L1 or L1/L2 smart amplifier, designed for all applications that provides a calibrated 1dBm incremental output power control. When used in conjunction with an active GPS receive antenna, it will retransmit GPS signals inside a building, hangar or any structure where GPS is not available. It can be used in an automated test environment or in a shielded room that needs L1 or L1/L2 signal. A user can easily use a push-button control to precisely determine the output power of the METROe signal. This reduces the need for multiple antennas, and multiple antenna cable runs, while lowering maintenance and installation costs. Key Features 1dBm incremental control over output signal level Frequency selectivity – L1 or L1/L2 GPS frequencies Continuous Built-In-Testing (BIT) Diagnostic Capabilities (Displays Faults) Automatic Oscillation Detection Use for any L1 or L1/L2 GPS retransmission application CE Certified R&TTE Certified Options AC or DC Power Multiple RF Connector Types L1 or L1/L2